Water quality – WiMo Plus
A single probe carries up to 7 sensors (each sensor measures one parameter).
It can measure 20 different aquatic parameters: conductivity, temperature, pressure, oxygen concentration, chlorophyll A fluorescence, phycocyanine fluorescence, phycoerythnine fluorescence, CDOM fDOM, redox, pH, nitrate, hydrocarbons, etc.
This sensor is submersible to a depth of 250 m.
Technical features
Data type:
- Temperature in °C,
- pH,
- pressure in bars,
- turbidity in NTU,
- oxygen concentration in mg/L,
- fluorescence in ppb,
- hydrocarbons in ppb,
- salinity in PSU,
- speed of sound in m/s, etc.
Data visualisation: Measurements are displayed in the form of curves on the UBY Environment platform.
Measurement frequency: Continuous
Transmission frequency: Every 5 minutes via modem
Network: 2G/3G/4G
Data storage: 15 MB SD card (approx. 500,000 measurements)
Power supply: Replaceable batteries
Battery life: 4 months
Dimensions (mm): 499 mm (without sensors), 85 mm diameter
Weight: 2.65 kg
Operating range: -2°C / +50°C
Submersible up to 250m
Mounting method and conditions:
Can be installed on a buoy (the probe alone sinks) but also on a fixed point vertically above measurement point. The probe sensors must be submerged and the modem out of the water.
(There are several possible cable lengths if you need to place the probe at the bottom of the water and the modem outside)
Technical requirements and maintenance
Required equipment: 2G/3G/4G network coverage
Maintenance: Remote supervision bu UBY
Battery replacement by UBY
Examples of platform visuals
Examples of evolution of turbidity and temperature in NTU et °C
Alerts of exceeded thresholds for all monitored parameters (here: turbidity and pH)
FAQ
The SD memory card is full, what
UBY peut fournir une nouvelle carte SD. Les données de l’ancienne sont stockées dans la plateforme Nuisalgo.
Est-ce que le capteur respecte la RGPD ?
Le capteur, son logiciel et ses algorithmes sont entièrement conformes à la RGPD.